How do I enable the wheel?
F1CC™ will not automatically detect and enable the wheel. Player must have the gamepad plugged in to navigate the menus. Using the gamepad, follow these commands:
Select "Options"
Choose "Controller Configuration"
Choose "Controller Assignment"
On this screen, you will see Player 1, Player 2, Player 3, and Player 4 listed on the left hand side, and on the bottom of the screen you will see Unassigned Wheels. If your wheel was properly set up, you will see a picture of a wheel here. Select the player you wish to configure with the DOWN/UP buttons. To assign a wheel, press RIGHT. The picture of the wheel will move up and be placed next to the player.
Can I use a hub?
Yes. Plug the hub into the top USB port, and plug the wheel into any of the hub ports. F1CC™ will not automatically detect it. Follow the directions in "How do I enable the wheel?"
How do I change between automatic and manual transmission?
After you choose your car and track, a race options screen will appear. Down on the list is a "Gears" options, which you can set to automatic or manual transmission.
How can I re-configure the buttons?
You cannot change the button configuration with the wheel. To see the configuration, follow these menu commands:
Select "Options"
Choose "Controller Configuration"
Select "Player 1" (or whichever player you need to configure)
Choose "Controller Configuration"
How can I calibrate the wheel?
It is highly recommended that you calibrate the wheel in F1CC™. To calibrate the wheel, follow these menu commands:
Select "Options"
Choose "Controller Configuration"
Select "Player 1" (or whichever player you need to configure)
Choose "Wheel Calibration"
Follow the on screen directions from here.
How can I adjust force feedback?
Make sure the power cable is plugged into the wheel.
To adjust the level of the force feedback or to see if it is turned off, follow these menu commands:
Select "Options"
Choose "Controller Configuration"
Select "Player 1" (or whichever player you need to configure)
Choose "Controller Configuration"
Select "Force Feedback"
Press LEFT or RIGHT to toggle force feedback
Logitech® GT Force™ compatibility:
You must follow the "How do I enable the wheel?" steps with the Logitech® GT Force™. Also, you must use the pedal attachment if you use the Logitech® GT Force™ with F1 2002™, otherwise you will get erratic behavior. You can use the Logitech® GT Force™ to navigate the menus. Here are the button mappings:
UP = X
DOWN = A
Back (Triangle) = Y
Select (X) = B
Logitech® MOMO® Force wheel compatibility:
Yes, the Logitech® MOMO® Force wheel does work in F1CC™, but you must remember to calibrate it. You may have to calibrate it twice. If the wheel is not calibrated, it may pull left or right.
Logitech® MOMO® Racing Forcefeedback Wheel compatibility:
No, the Logitech® MOMO® Racing Forcefeedback Wheel does not work in F1CC™.
Where can I find more information or seek more advice?