|By JensSchumi on Wednesday, February 20, 2002 - 03:58 pm:|
you can order the same lousy ones from CH (100k) or get a better one from Mike Turner, UK. You can find him in the LWFF-forum
|By Vince on Wednesday, February 20, 2002 - 02:32 pm:|
Where can you find the pots? I've tried electronic parts stores and no luck. I want to try and save my pedals and not throw them away.
|By JensSchumi on Saturday, January 5, 2002 - 05:55 pm:|
The pedal unit is straight forward, no big deal.
Make a note how the wires are plugged to the pots and go ahead.
BTW: My webpage contains some info about the LWFF, also about the pedals:
|By simracer on Saturday, January 5, 2002 - 08:47 am:|
How difficult is this to do? Any web pages with pictures or anything? I think the pots are going in my Wingman Formula Black. I don't want to take my wheel apart and screw something up.
Thanks in advance.
|By JensSchumi on Sunday, November 25, 2001 - 05:14 am:|
I'm a bit late, but nevermind:
your pots are gone.
exchange throttle and brake pot, so both pedals will operate on a fresh layer of graphite
|By Bob on Monday, August 27, 2001 - 04:34 am:|
It doesn't do it all the time, just every now and then it goes through it a couple times in a row. Other than that this wheel is great, 18 months and still goin strong. Wish they still made them like this.
Thanks again, Bob
|By aidan on Saturday, August 25, 2001 - 11:24 am:|
My guess is the mechanism is flexing, here is another post on the topic http://www.wingmanteam.com/discus/messages/5/424.html?SundayOctober2220000119pm
The USB connector will not help.
The only advice I can give is to avoid putting any excess force on the pot pdeals, and thus avoid the flexing. I am not sure how practical this advice is. After you do a reset of the firmware you could test in control panel to get a better idea of how much force causes the flex to happen.
There are several places on the web the describe the hw details of the product. If you do a search on "jens" on the bboard this will provide a good starting point.
|By Bob on Saturday, August 25, 2001 - 10:19 am:|
Anyone? Anyone? Bueller? Bueller?
|By Bob on Thursday, August 23, 2001 - 03:26 pm:|
I have the older Logitech Wingman FF (red wheel) and it keeps losing throttle and brake response. Gets to about 80% or so while holding the cursor over the gauge while testin in windows. I'll notice my speeds are slow so i gotta keep unplugging it to reset the firmware (that's what ya'll told me to do last time)
Anything else i could do? Clean something, replace something? I have it hooked into a standard game port, should i put it in a USB type connection?