|By Tom (Tom) on Friday, July 12, 2002 - 10:57 am:|
This sounds much like the cable between the PCB in the front of the wheel and the main PCB is broken - the cable carries the button and LED information back and forth. This can happen after extended usage; bending a cable back and forth *will* eventually break it.
If you're handy with tools, it wouldn't be too hard to make a new one. It's just a bunch of wires with a plug on either end...
|By Anonymous on Thursday, July 11, 2002 - 10:06 pm:|
I own a black wingman formula wheel, yes i know pretty old know and for a while now it has been playing up.
Basically what happens is that whenever i turn the wheel occassionaly the leds will turn off and also my paddles dont work, this is obviously *very* annoying when trying to change gears in GPL!!
The wheel is usually fine when centred but any decent movement to either the left or right will turn the leds off. To fix it i usually have to turn the wheel left or right and centre it again to get the leds back on.
Anyone had this problem and know how i could fix it or just have any suggestions?
Thanks for your time,