Red Momo wiring problem

WingMan Team Bulletin Board: General Questions: Red Momo wiring problem
Top of pagePrevious messageNext messageBottom of pageLink to this message   By Steve on Sunday, January 22, 2006 - 07:08 pm:

Me too as you can see from my post below.

No reply from anyone here about getting another cable so it looks like we have to sort it out ourselves.

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Anonymous on Friday, January 20, 2006 - 08:28 am:

whats the other wiring info, I am having the same thing going on and would like to fix it , so if you / would let me know how you fixed yours I would appreciat it.
thanks

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Anonymous on Sunday, November 13, 2005 - 02:13 am:

I have rewired my momo force and usb colours are.

red = pin 1
white = pin 2
green = pin 3
black = pin 4

hope this helps a few months late ;)

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Anonymous on Friday, July 8, 2005 - 04:50 pm:

Believe its..

Red = V
White = D-
Green = D+
Black = Ground

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Scoob92 on Friday, July 8, 2005 - 04:40 pm:

My 25 pin connector on the side of my red momo screwed up. I have disassembeled it, but the only wires I am not sure about are the USB ones. I have a red, green, white, and black wires out of the cable, and they go into pins 1,2,3,&4 in the 25 pin connector, but I don't know which colors go in which numbers. Can anyone help me? Muchly appreciated if someone could.
Thanks


Add a Message


This is a public posting area. If you do not have an account, enter your full name into the "Username" box and leave the "Password" box empty. Your e-mail address is optional.
Username:  
Password:
E-mail:
Post as "Anonymous"